Description
共通用語
モデル塗装用に特別に設計されています!
- 平らな面を作りやすい
- 持ちやすく使いやすい:サンドペーパー/布用ボード
- 最高のサイズ
- 平らな面を滑らかにする
- 人差し指を使う
- さまざまな持ち方
- 3本の指だけで砂を作る
- ハンディサイズで使いやすいです。エッジや平面の作成を楽しくします。
- さまざまな方法で保持できます。
- 5つの異なる識別可能な色
- 5つの異なる色
- ファイルを簡単に区別する
![](https://godhandusacorp.com/wp-content/uploads/2020/06/1-2.jpg)
![](https://godhandusacorp.com/wp-content/uploads/2020/06/2-2.jpg)
![](https://godhandusacorp.com/wp-content/uploads/2020/06/3-2.jpg)
FFボードは5色セットです。
各ファイルの色を指定して、一目で選択できます
- 両面テープをボードに貼り付けやすい
- FFボードに沿って15mm幅の両面テープを貼り付けます
- まさにFFボードの端に
![](https://godhandusacorp.com/wp-content/uploads/2020/06/5-2.jpg)
![](https://godhandusacorp.com/wp-content/uploads/2020/06/4-2.jpg)
ヒント:まず、テープを端から突き出します。
- FFボードの端に沿ってテープをカットします。
- 最初に突き出ていた部分をカットします
- 終了しました!
- FFボードと標準両面テープともに15mm幅
- テープを端に沿って貼り付け、端を切り落とすだけです
- 使用前に保護紙をはがしてください
- 使用前にボードをアルコールで拭いてください
- ボードにエメリークロスまたはサンドペーパーを貼り付けて仕上げます
- 両面テープをはがします。
- ボードの端に沿ってテープを貼り付けます
- この線に沿って
- Cut off emery cloth or sand paper with a cutting tool along the edge of the board
- Better to cut just once with a sharp edge rather than cutting multiple times
- Complete!
![](https://godhandusacorp.com/wp-content/uploads/2020/06/6-2.jpg)
![](https://godhandusacorp.com/wp-content/uploads/2020/06/7-2.jpg)
![](https://godhandusacorp.com/wp-content/uploads/2020/06/8-2.jpg)
-
- Stick emery cloth or sand paper on to the board along the edge
- Cut the emery cloth or sand paper, guiding along the board
- Does not waste emery cloth or sand paper
- FF board is made so that it will not waste any part of the emery clothe or sand paper
- Can cut off 12 pieces of FF boards with just one emery cloth or sand paper
- Size of one FF board
- Size of 12 FF boards
- 【Emery cloth】GodHand FLEX CLOTH Emery Cloth SET
- 【Sand paper】 TAMIYA Finishing Paper
- Best with double-sided tape designated for FF boards
Recommend Flex Cloth Emery Cloth set
- 最初にFFボードにテープを貼り、次にエメリークロスをボードに貼り付けると、接着力の弱い側がボードに、接着力の強い側がエメリークロスになります。
- エメリークロスにしっかりと密着しますが、剥がしやすいです
- ミニFFボード用両面テープ
- ※ファイルとミニFFボードは別売りです。
- 剥離紙/強い粘着面/フィルム/取り外し可能な粘着面
![](https://godhandusacorp.com/wp-content/uploads/2020/06/9-2.jpg)
![](https://godhandusacorp.com/wp-content/uploads/2020/06/10-2.jpg)
![](https://godhandusacorp.com/wp-content/uploads/2020/06/11-2.jpg)
![](https://godhandusacorp.com/wp-content/uploads/2020/06/12-2.jpg)